Lights aren't just for looks. Done right, RC airplane lights tell you which way your plane is pointing in the dark — the difference between a clean night landing and a crash you never saw coming. Here's how I light a plane properly.
At dusk or at night, an RC plane becomes a black silhouette. You lose track of whether it's coming toward you or flying away — and that confusion is how planes get crashed. Proper lighting borrows the same convention full-size aircraft use, so a single glance tells you the plane's heading and attitude.
The standard aviation convention — easy to remember and instantly readable in the air:
Red light on the port (left) wing. "Red, right? No — red left."
Green light on the starboard (right) wing.
Steady red and green on the wingtips. The core of orientation — add these first.
Bright white flashes, usually on the wingtips or tail. They cut through darkness and make the plane easy to spot at distance.
A white or red light at the tail helps with attitude — telling nose-up from nose-down on approach.
Optional, but it looks incredible. A strip along the fuselage or under the wings for show effects and rainbow modes.
Lighting shares the plane with your ESC, receiver, and servos, so plan the power before you stick strips on foam. My free Wiring Designer has an LED wiring option — pick your battery, ESC, and receiver, add lights, and it draws the exact hookup for your setup, including where the 12V feed and shared ground go.
The old way meant wiring each lighting circuit to a spare receiver channel — and most beginner radios don't have channels to spare. With addressable strips and a dedicated controller, all of these effects run on a single strip and you switch between them from your phone, leaving your transmitter free for flying.
That's exactly what my Wi-Fi RC LED Controller does — navigation lights, strobes, and show effects on 12V WS2815 strips, controlled from your phone over Wi-Fi.
Phone-controlled navigation lights, strobes, and effects for 12V WS2815 strips — designed and tested on real RC airplanes.
The controller is built to order; these ship now.
Servo Lead Heat-Shrink LabelsAIL, ELE, RUD, THRO and the rest, shrunk onto the lead so the receiver bay reads itself. Four packs.from $19.99See the label kit →
XT60 Battery Status CapsGreen end out: charged and ready. Red end out: flown. Twelve caps, so every pack in the box tells you.$11.99See the caps →
ER Sparrow Mk II PlansTrue-1:1 cutting templates and the 8-page build guide for the 30-inch one-hour trainer. Print at home or at a print shop.$8Get the plans →
