Know Exactly What Plugs Where.
Stop tracing servo wires through your airplane every time you’re working around the receiver. These heat-shrink labels give each lead a clean, permanent ID so you can instantly identify Aileron, Elevator, Rudder, Throttle, Flaps, Gear, Aux channels and other connections.
Choose 30 labels for a few airplanes, or stock your workbench with the 90-label Builder Pack.
$19.99 Standard 30-Pack · $0.67 per label
Your labels
Labels selected: 0 / 30
Up to 12 characters per label. Letters, numbers, space and . - _ / + #. Printed in capitals.
A receiver bay can turn into a pile of nearly identical servo leads fast. Instead of following every wire back through the airplane, label each connection while you’re building it.
Slide the label over the connector, position it near the receiver end of the lead, apply heat, and you’re done.
Slide the heat-shrink label over the servo connector and onto the wire.
Move the label where you want it, normally near the receiver-side connector.
Apply controlled heat until the sleeve shrinks securely around the wire.
Heat with care. Use normal heat-shrink practice and avoid overheating servo wires, connectors or nearby components.
Enough labels to organize several typical RC airplanes, with extra labels for the most commonly used channels.
Showing the Standard 30-Pack. Change pack ↑
If you regularly build, repair, modify or maintain RC airplanes, a 30-pack disappears quickly.
The 90-label Builder Pack gives you three times the labels at a significantly lower cost per label, with extra quantities of the connections RC builders use most.
Save $14.98 compared with three Standard Packs (3 × $19.99 = $59.97)
Packed flat, no organizer. Same labels, same print, three times as many.
Your RC Label Kit, Already Organized.
The Deluxe Builder Pack takes the same 90-label assortment and adds a reusable compartment organizer.
Instead of digging through a bag of labels, each type stays separated and ready at your workbench.
The case is rigid, so shipping for the Deluxe pack is worked out at checkout like everything else and may differ from the flat packs.
Jets, giant-scale airplanes, multi-motor builds, lighting systems, smoke systems, bomb drops, retract controllers and custom electronics don’t always fit the standard channel list.
Choose the Custom 30-Pack and create the exact labels your airplane needs.
Examples of custom labels
Examples only — these are not included in the Standard Pack. Type anything up to 12 characters.
| Property | Heat-shrink labels | Masking tape | Handwritten stickers | Trying to remember |
|---|---|---|---|---|
| Clean, permanent installation | ✓ | — | — | — |
| No sticky adhesive left behind | ✓ | — | — | ✓ |
| Stays attached to the wire | ✓ | Sometimes | Sometimes | — |
| Easy to read | ✓ | Depends on the pen | Depends on the pen | — |
| Compact in a crowded receiver bay | ✓ | — | — | ✓ |
| Product type | Printable heat-shrink wire identification sleeve |
|---|---|
| Black text on white sleeve | |
| Primary use | RC servo and electronics lead identification |
| Pack quantity | 30 |
| Installation | Slide over the connector before shrinking |
| Custom text | Up to 12 characters per label (Custom 30-Pack) |
Only what has been confirmed is listed. If you need a dimension or a rating for a specific connector, ask before you order.
Once every lead says what it is, keep every extension plugged in. The RC Servo Connector Safety Locks fit around a joined servo connection so it does not work loose out in a wing.
$29.99 $34.98 bought separately
Save $4.99 against the two packs on their own
Want custom text or a bigger label pack? Choose it above and add the locks separately.
Something else? Ask Eric — the answer gets added here if it would help the next builder.
